اقتباس:
المشاركة الأصلية كتبت بواسطة العفريت الازرق
|
هذه الطريقة
بالبداية تأكد أن
Android Version : 4.0.3
build number : XWLPG
غير الاصدار الذي بالأعلى لا أنصح بتطبيق الكلام الذي يلي :
- It’s important you’ve the proper drivers for the phone installed. If you have installed Samsung’s Kies software, you already have the drivers, so download them only if you haven’t installed Kies.
Download links: 32 bit (x86) Windows | 64-bit (x64) Windows
- Make sure you are on the XWLPG Ice Cream Sandwich Android 4.0 firmware available → here.
- Download CF-Root kernel from the official download page → here.
Filename: CF-Root-SGS2_XW_NEE_LPG-v5.5-CWM5.zip
- Unzip the downloaded file once. You will get a .tar file – CF-Root-SGS2_XW_NEE_LPG-v5.5-CWM5.tar.
DO NOT extract the .tar file (this might show up as a zip file as well, but do not extract it). You need to flash the .tar file using Odin to gain root access and install ClockworkMod Recovery (CWM) alongside. (If you’re getting a zImage file, it means you’ve extracted the .tar file too! — and that’s not a right thing to do.)
- Download Odin 1.85 from → here.
Filename: Odin 1.85.zip | Size: 199 KB
- Extract the contents of the Odin 1.85.zip file to a folder.
- Disconnect your phone if it’s connected to PC, then switch it off.
- Now, put the Galaxy S2 in Download Mode — press and hold these keys together: Volume Down + Home + Power. A Warning! screen will come up; press Volume Up key to continue to enter Download Mode.
- Open Odin — double-click the Odin3 v1.85.exe that you got after extracting the file Odin 1.85.zip.
- In ODIN, click on the PDA button, then select the CF-Root-SGS2_XW_NEE_LPG-v5.5-CWM5.tarfile obtained in step 4.
- Important! Do not make any other changes in Odin except selecting the required files as given in step 10. Leave all other options as they are.
- Connect your phone to PC now. You should get the message “Added!” under Odin’s message box in the bottom left.
If you don’t get this message, then probably there is a problem with drivers. Make sure you’ve proper drivers installed (check step 1). Also, uninstall Kies from the Control Panel as well (this will leave the drivers on the computer but remove Kies which can interfere with the procedure).
- Now, hit the START button to start flashing CF-Root kernel. When the flashing is complete, your phone will automatically reboot — and when you see the Samsung logo, you can safely unplug the cable. Plus, you’ll get a PASS (with green background) message in the left-most box at the very top of the Odin. What to do if Odin gets stuck: If ODIN gets stuck and doesn’t seem to be doing anything, or you get a FAIL message (with red background) in ODIN, disconnect the phone from the PC, close ODIN, remove battery, re-insert it, turn phone on in Download mode again, and do the procedure again from Step 9.
- If you run into any roadblocks while flashing the kernel, let us know and we’ll help you out.
Your phone is now rooted and CWM recovery has been installed on it, with CF-Root kernel. Using all those favourite root-enabled apps of yours is now possible. Enjoy!
</H3>