السلام عليكم ورحمة الله و تعالى :
هنا كيف تثبت GARMIN MOBILE PC في ASUS R2H
Windows XP is the OS that we used here.
Before start anything else, you need this tool which is called GPSCtrl.exe to activate or deactivate your built in GPS. This tool can be obtain freely
Garmin’s software needs some specific hardware device, which is, Garmin GPS, to used. To overcome this limitation, we will harness the power of Franson GPSGate.
The problem is, Garmin Mobile PC (GMPC) is not able to recognize the ‘virtual com port’ created by GPSGate. Again we will try to solve this problem with the use of
com0com free utility.
Impatient way
1. Prepare all the software mentioned above.
2. Extract GPSCtrl to C:\Tools folder
3. Install com0com. After installation, this utility will automatically add 2 virtual com ports, CNCA0 and CNCB0. Rename the port to any com number with setup
(GUI interface). For me, I rename it into COM25 for CNCA0 and COM26 for CNCB0
4. Install GPSGate, cancelled the setup wizard if it appear
5. Activate the GPS with gpsOn.bat from the gpsCtrl utility
6. Run GpsGate.
7. At the input tab, choose COM2 (This should be the default port your internal GPS connected to). Click Run. If nothing wrong, you should see “Running OK!”
and “GPS data is coming in.” Also at the system tray, you’ll see the icon’s color is yellow.
8. At the output tab add “COM Port” (NOT VIRTUAL or GARMIN emulated), and assigned to COM25 (was CNCA0).
9. Reboot the computer.
10. Activate GPS, run GpsGate then install and run GMPC
11. Stop the auto detection of GPS from Settings > System > Remote GPS > Disable
12. Choose serial port aka COM26 (was CNCB0) and click Enable
13. Your Garmin should be able to get connected to GPS for now.
So, the flow is like the diagram below
INTERNAL GPS -> GpsGate -> COM25 (CNCA0) -> COM26 (CNCB0) -> GMPC
GpsGate => to emulate Garmin GPS to run with Garmin software
com0com => NULL COM Port emulator