الكمبيوتر الكفي - الذاكرة ممتلئة وللأسف الذاكرة الخارجية فاضية فما الحل

السلام عليكم
جوالي HTC 620 G ومواصفاته على الرابط التالي
[url]http://www.gsmarena.com/htc_desire_620g_dual_sim-6841.php[/url]

حاولت حل المشكلة وكان هدفي أن يتم حفظ البرامج ألي أو أوتوماتيك على الذاكرة الخارجية فاتبعت شرحين اثنين وهما بعنوان
الاول كيف تجعل هاتفك الأندرويد يقوم بتثبيت التطبيقات مباشرة في ذاكرة التخزين الخارجية micro sd - YouTube
على الرابط التالي
[url]https://www.youtube.com/watch?v=2ev28RCNp1s[/url]

والشرح الثاني هو إجعل هاتفك يقوم بتنصيب التطبيقات على الذاكرة الخارجية مباشرة - YouTube

على الرابط التالي
[url]https://www.youtube.com/watch?v=fQK_nzJQxic&t=9s[/url]

اما انا فقد اتبعت الخطوات لكن للأسف في اخر خطوة لم ينفذ الجوال النسخ على الذاكرة الخارجية
وقد اخرج لي الشاشة السوداء الرسالة التالية

طالبتني الشاشة السوداء بالجافا وحملت الجافا

ثم لم يعترف الكمبيوتر بالجوال فعرفت الجوال

[INDENT][LEFT]
C:\>cd "android-sdk-windows"

C:\android-sdk-windows>cd "tools"

C:\android-sdk-windows\tools>androidandroid.bat
'androidandroid.bat' is not recognized as an internal or external command,
operable program or batch file.

C:\android-sdk-windows\tools>android.bat

ERROR: No suitable Java found. In order to properly use the Android Developer
Tools, you need a suitable version of Java JDK installed on your system.
We recommend that you install the JDK version of JavaSE, available here:
[url]http://www.oracle.com/technetwork/java/javase/downloads[/url]

If you already have Java installed, you can define the JAVA_HOME environment
variable in Control Panel / System / Avanced System Settings to point to the
JDK folder.

You can find the complete Android SDK requirements here:
[url]http://developer.android.com/sdk/requirements.html[/url]

C:\android-sdk-windows\tools>android.bat

C:\android-sdk-windows\tools>cd..

C:\android-sdk-windows>cd "platform-tools"

C:\android-sdk-windows\platform-tools>adb devices
List of devices attached

C:\android-sdk-windows\platform-tools>adb devices
List of devices attached

C:\android-sdk-windows\platform-tools>adb devices
List of devices attached

C:\android-sdk-windows\platform-tools>adb devices
List of devices attached
* daemon not running. starting it now on port 5037 *
* daemon started successfully *

C:\android-sdk-windows\platform-tools>adb devices
List of devices attached

C:\android-sdk-windows\platform-tools>adb devices
List of devices attached

C:\android-sdk-windows\platform-tools>adb devices
List of devices attached
LC6AMY602196 device

C:\android-sdk-windows\platform-tools>adb she11 pm set-install-location 2
Android Debug Bridge version 1.0.36
Revision 0e9850346394-android

-a - directs adb to listen on all interfaces for a connection
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <specific device> - directs command to the device or emulator with the given
serial number or qualifier. Overrides ANDROID_SERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
-H - Name of adb server host (default: localhost)
-P - Port of adb server (default: 5037)
devices [-l] - list all connected devices
('-l' will also list device qualifiers)
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devices.

device commands:
adb push <local>... <remote>
- copy files/dirs to device
adb pull [-a] <remote>... <local>
- copy files/dirs from device
(-a preserves file timestamp and mode)
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
adb shell [-e escape] [-n] [-Tt] [-x] [command]
- run remote shell command (interactive shell if no command given)
(-e: choose escape character, or "none"; default '~')
(-n: don't read from stdin)
(-T: disable PTY allocation)
(-t: force PTY allocation)
(-x: disable remote exit codes and stdout/stderr separation)
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward --list - list all forward socket connections.
the format is a list of lines with the following format:
<serial> " " <local> " " <remote> "\n"
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb forward --no-rebind <local> <remote>
- same as 'adb forward <local> <remote>' but fails
if <local> is already forwarded
adb forward --remove <local> - remove a specific forward socket connection
adb forward --remove-all - remove all forward socket connections
adb reverse --list - list all reverse socket connections from device
adb reverse <remote> <local> - reverse socket connections
reverse specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
adb reverse --no-rebind <remote> <local>
- same as 'adb reverse <remote> <local>' but fails
if <remote> is already reversed.
adb reverse --remove <remote>
- remove a specific reversed socket connection
adb reverse --remove-all - remove all reversed socket connections from device
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-lrtsdg] <file>
- push this package file to the device and install it
(-l: forward lock application)
(-r: replace existing application)
(-t: allow test packages)
(-s: install application on sdcard)
(-d: allow version code downgrade (debuggable packages only))
(-g: grant all runtime permissions)
adb install-multiple [-lrtsdpg] <file...>
- push this package file to the device and install it
(-l: forward lock application)
(-r: replace existing application)
(-t: allow test packages)
(-s: install application on sdcard)
(-d: allow version code downgrade (debuggable packages only))
(-p: partial application install)
(-g: grant all runtime permissions)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport [<path>] - return all information from the device that should be included in a zipped bug report.
If <path> is a file, the bug report will be saved as that file.
If <path> is a directory, the bug report will be saved in that directory with the name provided by the device.
If <path> is omitted, the bug report will be saved in the current directory with the name provided by the device.
NOTE: if the device does not support zipped bug reports, the bug report will be output on stdout.
adb backup [-f <file>] [-apk|-noapk] [-obb|-noobb] [-shared|-noshared] [-all] [-system|-nosystem] [<packages...>]
- write an archive of the device's data to <file>.
If no -f option is supplied then the data is written
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks themselves
in the archive; the default is noapk.)
(-obb|-noobb enable/disable backup of any installed apk expansion
(aka .obb) files associated with each application; the default
is noobb.)
(-shared|-noshared enable/disable backup of the device's
shared storage / SD card contents; the default is noshared.)
(-all means to back up all installed applications)
(-system|-nosystem toggles whether -all automatically includes
system applications; the default is to include system apps)
(<packages...> is the list of applications to be backed up. If
the -all or -shared flags are passed, then the package
list is optional. Applications explicitly given on the
command line will be included even if -nosystem would
ordinarily cause them to be omitted.)

adb restore <file> - restore device contents from the <file> backup archive

adb disable-verity - disable dm-verity checking on USERDEBUG builds
adb enable-verity - re-enable dm-verity checking on USERDEBUG builds
adb keygen <file> - generate adb public/private key. The private key is stored in <file>,
and the public key is stored in <file>.pub. Any existing files
are overwritten.
adb help - show this help message
adb version - show version num

scripting:
adb wait-for[-<transport>]-<state>
- wait for device to be in the given state:
device, recovery, sideload, or bootloader
Transport is: usb, local or any [default=any]
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb get-devpath - prints: <device-path>
adb remount - remounts the /system, /vendor (if present) and /oem (if present) partitions on the device read-write
adb reboot [bootloader|recovery]
- reboots the device, optionally into the bootloader or recovery program.
adb reboot sideload - reboots the device into the sideload mode in recovery program (adb root required).
adb reboot sideload-auto-reboot
- reboots into the sideload mode, then reboots automatically after the sideload regardless of the result.
adb sideload <file> - sideloads the given package
adb root - restarts the adbd daemon with root permissions
adb unroot - restarts the adbd daemon without root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port

networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns

adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:

- If <directory> is not specified, /system, /vendor (if present), /oem (if present) and /data partitions will be updated.

- If it is "system", "vendor", "oem" or "data", only the corresponding partition
is updated.

internal debugging:
adb reconnect Kick current connection from host side and make it reconnect.
adb reconnect device Kick current connection from device side and make it reconnect.
environment variables:
ADB_TRACE - Print debug information. A comma separated list of the following values
1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes priority over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these debug tags are printed.

C:\android-sdk-windows\platform-tools>[/LEFT][/INDENT]

[B][COLOR="Red"]ا[SIZE="6"]لمشكلة التي لم أستطع حلها في هذه الرسالة[/SIZE]
[/COLOR][/B][INDENT]
[LEFT]
C:\android-sdk-windows\platform-tools>adb she11 pm set-install-location 2
Android Debug Bridge version 1.0.36
Revision 0e9850346394-android

-a - directs adb to listen on all interfaces for a connection
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <specific device> - directs command to the device or emulator with the given
serial number or qualifier. Overrides ANDROID_SERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
-H - Name of adb server host (default: localhost)
-P - Port of adb server (default: 5037)
devices [-l] - list all connected devices
('-l' will also list device qualifiers)
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devices.

device commands:
adb push <local>... <remote>
- copy files/dirs to device
adb pull [-a] <remote>... <local>
- copy files/dirs from device
(-a preserves file timestamp and mode)
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
adb shell [-e escape] [-n] [-Tt] [-x] [command]
- run remote shell command (interactive shell if no command given)
(-e: choose escape character, or "none"; default '~')
(-n: don't read from stdin)
(-T: disable PTY allocation)
(-t: force PTY allocation)
(-x: disable remote exit codes and stdout/stderr separation)
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward --list - list all forward socket connections.
the format is a list of lines with the following format:
<serial> " " <local> " " <remote> "\n"
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb forward --no-rebind <local> <remote>
- same as 'adb forward <local> <remote>' but fails
if <local> is already forwarded
adb forward --remove <local> - remove a specific forward socket connection
adb forward --remove-all - remove all forward socket connections
adb reverse --list - list all reverse socket connections from device
adb reverse <remote> <local> - reverse socket connections
reverse specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
adb reverse --no-rebind <remote> <local>
- same as 'adb reverse <remote> <local>' but fails
if <remote> is already reversed.
adb reverse --remove <remote>
- remove a specific reversed socket connection
adb reverse --remove-all - remove all reversed socket connections from device
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-lrtsdg] <file>
- push this package file to the device and install it
(-l: forward lock application)
(-r: replace existing application)
(-t: allow test packages)
(-s: install application on sdcard)
(-d: allow version code downgrade (debuggable packages only))
(-g: grant all runtime permissions)
adb install-multiple [-lrtsdpg] <file...>
- push this package file to the device and install it
(-l: forward lock application)
(-r: replace existing application)
(-t: allow test packages)
(-s: install application on sdcard)
(-d: allow version code downgrade (debuggable packages only))
(-p: partial application install)
(-g: grant all runtime permissions)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport [<path>] - return all information from the device that should be included in a zipped bug report.
If <path> is a file, the bug report will be saved as that file.
If <path> is a directory, the bug report will be saved in that directory with the name provided by the device.
If <path> is omitted, the bug report will be saved in the current directory with the name provided by the device.
NOTE: if the device does not support zipped bug reports, the bug report will be output on stdout.
adb backup [-f <file>] [-apk|-noapk] [-obb|-noobb] [-shared|-noshared] [-all] [-system|-nosystem] [<packages...>]
- write an archive of the device's data to <file>.
If no -f option is supplied then the data is written
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks themselves
in the archive; the default is noapk.)
(-obb|-noobb enable/disable backup of any installed apk expansion
(aka .obb) files associated with each application; the default
is noobb.)
(-shared|-noshared enable/disable backup of the device's
shared storage / SD card contents; the default is noshared.)
(-all means to back up all installed applications)
(-system|-nosystem toggles whether -all automatically includes
system applications; the default is to include system apps)
(<packages...> is the list of applications to be backed up. If
the -all or -shared flags are passed, then the package
list is optional. Applications explicitly given on the
command line will be included even if -nosystem would
ordinarily cause them to be omitted.)

adb restore <file> - restore device contents from the <file> backup archive

adb disable-verity - disable dm-verity checking on USERDEBUG builds
adb enable-verity - re-enable dm-verity checking on USERDEBUG builds
adb keygen <file> - generate adb public/private key. The private key is stored in <file>,
and the public key is stored in <file>.pub. Any existing files
are overwritten.
adb help - show this help message
adb version - show version num

scripting:
adb wait-for[-<transport>]-<state>
- wait for device to be in the given state:
device, recovery, sideload, or bootloader
Transport is: usb, local or any [default=any]
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb get-devpath - prints: <device-path>
adb remount - remounts the /system, /vendor (if present) and /oem (if present) partitions on the device read-write
adb reboot [bootloader|recovery]
- reboots the device, optionally into the bootloader or recovery program.
adb reboot sideload - reboots the device into the sideload mode in recovery program (adb root required).
adb reboot sideload-auto-reboot
- reboots into the sideload mode, then reboots automatically after the sideload regardless of the result.
adb sideload <file> - sideloads the given package
adb root - restarts the adbd daemon with root permissions
adb unroot - restarts the adbd daemon without root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port

networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns

adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:

- If <directory> is not specified, /system, /vendor (if present), /oem (if present) and /data partitions will be updated.

- If it is "system", "vendor", "oem" or "data", only the corresponding partition
is updated.

internal debugging:
adb reconnect Kick current connection from host side and make it reconnect.
adb reconnect device Kick current connection from device side and make it reconnect.
environment variables:
ADB_TRACE - Print debug information. A comma separated list of the following values
1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes priority over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these debug tags are printed.

[/LEFT][/INDENT]

[SIZE="6"]وفي الختام إذا يوجد أي حل أخر أتحفونا به [/SIZE]